dc-dc converters e class non-isolated 1 sil15e series 12 vin single output new product file name: sil15e_12.pdf rev (04): 16 dec 2005 2 year warranty all specifications are typical at nominal input, full load at 25 c unless otherwise stated specifications ? 15 a current rating ? input voltage range: 10 vdc to 14 vdc ? output voltage range: 0.8 vdc to 3.63 vdc ? ultra high efficiency: 94% @ 12 vin and 3.3 vout ? extremely low internal power dissipation ? minimal thermal design concerns ? designed in reliability: mtbf of >7 million hours per telcordia sr-332 ? ideal solution where board space is at a premium or tighter card pitch is required ? industry standard footprint and pin out ? available rohs compliant the sil15e series are non-isolated dc-dc converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from a 12 v source. the sil15e offers a range of fixed outputs and one wide trim output unit at an industry leading 15 a which allows maximum design flexibility and a pathway for future upgrades. the sil15e is designed for applications that include distributed power, workstations, optical network and wireless applications. implemented using state of the art surface mount technology and automated manufacturing techniques, the sil15e offers compact size and efficiencies of up to 94%. emc characteristics electrostatic discharge en61000-4-2, iec801-2 conducted immunity en61000-4-6 radiated immunity en61000-4-3 general specifications efficiency see table insulation voltage non-isolated switching frequency fixed 200 khz typ. approvals and en60950 standards ul/cul60950 material flammability ul94v-0 dimensions (lxwxh) 50.8 x 7.8 x 12.7 mm (vertical model) 2.0 x 0.31 x 0.5 inches pin length 0.135 0.02 in (3.43 0.5 mm) weight 5 g (0.18 oz) mtbf telcordia sr-332 7,042,000 hours environmental specifications thermal performance operating ambient, -40 oc to +85 oc (see note 2) temperature non-operating -40 oc to +125 oc protection short-circuit continuous thermal automatic recovery output specifications voltage adjustability 0.8-3.63 vdc setpoint accuracy 0.4% typ. line regulation 0.2% typ. load regulation 1.0% typ. total error band 3.0% typ. minimum load 0 a overshoot/undershoot none ripple and noise 5 hz to 20 mhz 60 mv pk-pk 25 mv rms temperature co-efficient 0.01%/oc transient response 100 mv max. deviation 100 s recovery to within 1.0% remote sense 10% vo compensation input specifications input voltage range 10-14 vdc input current no load 70 ma input current (max.) 5.5 a max. @ io max. and vout = 3.3 v input reflected ripple 60 ma rms remote on/off (see note 1) start-up time 35 ms international safety standard approvals ul/cul can/csa 22.2 no. e174104 ul 60950 file no. e174104 tv product service (en60950) certificate no. b 03 10 38572 037 cb report and certificate to de3-51686m1
for the most current data and application support visit www.artesyn.com/powergroup/products.htm n n o o t t e e s s 1 the sil15e features an positive logic remote on/off operation. if not using the remote on/off pin, leave the pin open (the converter will be on). the remote on/off pin is referenced to ground. the following conditions apply for the sil15e: configuration converter operation remote pin open circuit unit is on remote pin pulled low [von/off <0.8 v] unit is off remote pin pulled high [von/off >1.6 v] unit is on an negative logic remote on/off version is also possible with this converter. to order please place the suffix r towards the end of the model number, e.g. sil15e-12w3v3-vrj 2 full derating curves available in both the longform datasheet and application note. 3 tse rohs 5/6 (non pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 4 notice: some models do not support all options. please contact your local artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. sil15e series 12 vin single output dc-dc converters e class non-isolated 2 new product file name: sil15e_12.pdf rev (04): 16 dec 2005 sil15e-12w3v3-vj part number system with options product family sil = single in line rated output current 15 = 15 amps input voltage 12 = 10 vdc to 14 vdc type of output w = wide output voltage 0.8 vdc to 3.63 vdc the ultra-wide output voltage trim range offers major advantages to users who select the sil15e-12w3v3. it is no longer necessary to purchase a variety of modules in order to cover different output voltages. the output voltage can be trimmed in a range of 0.8 vdc to 3.63 vdc. when the sil15e-12w3v3 converter leaves the factory the output has been adjusted to the default voltage of 0.8 v. o o u u t t p p u u t t v v o o l l t t a a g g e e a a d d j j u u s s t t m m e e n n t t o o f f t t h h e e s s i i l l 1 1 5 5 e e - - 1 1 2 2 w w 3 3 v v 3 3 s s e e r r i i e e s s performance e = enhanced performance output input output output output efficiency regulation model power voltage voltage current current (typ.) line load number (3) (max.) (min.) (max.) 49.5 w 10-14 vdc 0.8- 3.63 vdc 0 a 15 a 94% 0.2% 1.0% sil15e-12w3v3-vj mounting option v = vertical h = horizontal packaging options (3) j = pb-free (rohs 6/6 compliant)
for the most current data and application support visit www.artesyn.com/powergroup/products.htm sil15e series 12 vin single output dc-dc converters e class non-isolated 3 new product all dimensions in inches (mm) 1.900 (48.26) 0.050 (1.27) 0.100 (2.54) 2.000 (50.80) front view 0.500 (12.70) 0.635 (16.13) 0.135 (3.43) pcb 0.168 (4.26) side view 0.307 (7.80) j1 j2 15 4 3 2 156 3 2 datasheet ? artesyn technologies ? 2005 the information and specifications contained in this datasheet are believed to be correct at time of publication. however, arte syn technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. specifications are subject to change without notice. no rights under any patent accompany the sale of any such product(s) or information contained herein. please consult our website for the following items: application note longform datasheet www.artesyn.com file name: sil15e_12.pdf rev (04): 16 dec 2005 j1 pin connections pin number function 1 +vout 2 +vout 3 remote sense (+) 4 +vout 5 ground j2 pin connections pin number function 1 ground 2+vin 3+vin 4 no pin 5 trim 6 remote on/off
|
